Furi HAL API. More...

#include <furi_hal_cortex.h>
#include <furi_hal_clock.h>
#include <furi_hal_adc.h>
#include <furi_hal_bus.h>
#include <furi_hal_crypto.h>
#include <furi_hal_debug.h>
#include <furi_hal_dma.h>
#include <furi_hal_os.h>
#include <furi_hal_sd.h>
#include <furi_hal_i2c.h>
#include <furi_hal_region.h>
#include <furi_hal_resources.h>
#include <furi_hal_rtc.h>
#include <furi_hal_speaker.h>
#include <furi_hal_gpio.h>
#include <furi_hal_light.h>
#include <furi_hal_power.h>
#include <furi_hal_interrupt.h>
#include <furi_hal_version.h>
#include <furi_hal_bt.h>
#include <furi_hal_spi.h>
#include <furi_hal_flash.h>
#include <furi_hal_vibro.h>
#include <furi_hal_usb.h>
#include <furi_hal_usb_hid.h>
#include <furi_hal_usb_ccid.h>
#include <furi_hal_serial_control.h>
#include <furi_hal_serial.h>
#include <furi_hal_info.h>
#include <furi_hal_random.h>
#include <furi_hal_target_hw.h>

Functions
void	furi_hal_init_early (void)
	Early FuriHal init.

void	furi_hal_deinit_early (void)
	Early FuriHal deinit.

void	furi_hal_init (void)
	Init FuriHal.

void	furi_hal_switch (void *address)
	Jump to the void*.

Detailed Description

Furi HAL API.

Function Documentation

◆ furi_hal_deinit_early()

void furi_hal_deinit_early ( void )

Early FuriHal deinit.

Undo furi_hal_init_early, prepare system for switch to another firmware/bootloader.

◆ furi_hal_init()

void furi_hal_init ( void )

Init FuriHal.

Initialize the rest of the HAL, must be used after furi_hal_init_early.

◆ furi_hal_init_early()

void furi_hal_init_early ( void )

Early FuriHal init.

Init essential subsystems used in pre-DFU stage. This state can be undone with furi_hal_deinit_early.

◆ furi_hal_switch()

void furi_hal_switch ( void * address )

Jump to the void*.

Allow your code to transfer control to another firmware.

Warning: This code doesn't reset system before jump. Call it only from main thread, no kernel should be running. Ensure that no peripheral blocks active and no interrupts are pending.

Parameters