Loading...
Searching...
No Matches
NFC Flipper File Formats

UID + Header (General format)

Example

Filetype: Flipper NFC device
Version: 4
# Device type can be ISO14443-3A, ISO14443-3B, ISO14443-4A, NTAG/Ultralight, Mifare Classic, Mifare DESFire
Device type: ISO14443-4A
# UID is common for all formats
UID: 04 48 6A 32 33 58 80
-------------------------
(Device-specific data)

Description

This file format is used to store the device type and the UID of an NFC device. It does not store any internal data, so it is only used as a header for other formats.

Version differences:

  1. Initial version, deprecated
  2. LSB ATQA (e.g. 4400 instead of 0044)
  3. MSB ATQA (current version)
  4. Replace UID device type with ISO14443-3A

ISO14443-3A

Filetype: Flipper NFC device
Version: 4
# Device type can be ISO14443-3A, ISO14443-3B, ISO14443-4A, NTAG/Ultralight, Mifare Classic, Mifare DESFire
Device type: ISO14443-3A
# UID is common for all formats
UID: 34 19 6D 41 14 56 E6
# ISO14443-3A specific data
ATQA: 00 44
SAK: 00

Description

This file format is used to store the UID, SAK and ATQA of an ISO14443-3A device. UID must be either 4 or 7 bytes long. ATQA is 2 bytes long. SAK is 1 byte long.

Version differences: None, there are no versions yet.

ISO14443-3B

Filetype: Flipper NFC device
Version: 4
# Device type can be ISO14443-3A, ISO14443-3B, ISO14443-4A, NTAG/Ultralight, Mifare Classic, Mifare DESFire
Device type: ISO14443-3B
# UID is common for all formats
UID: 30 1D B3 28
# ISO14443-3B specific data
Application data: 00 12 34 FF
Protocol info: 11 81 E1

Description

This file format is used to store the UID, Application data and Protocol info of a ISO14443-3B device. UID must be 4 bytes long. Application data is 4 bytes long. Protocol info is 3 bytes long.

Version differences: None, there are no versions yet.

ISO14443-4A

Example

Filetype: Flipper NFC device
Version: 4
# Device type can be ISO14443-3A, ISO14443-3B, ISO14443-4A, NTAG/Ultralight, Mifare Classic, Mifare DESFire
Device type: ISO14443-4A
# UID is common for all formats
UID: 04 48 6A 32 33 58 80
# ISO14443-3A specific data
ATQA: 03 44
SAK: 20
# ISO14443-4A specific data
ATS: 06 75 77 81 02 80

Description

This file format is used to store the UID, SAK and ATQA of a ISO14443-4A device. It also stores the Answer to Select (ATS) data of the card. ATS must be no less than 5 bytes long.

Version differences: None, there are no versions yet.

NTAG/Ultralight

Example

Filetype: Flipper NFC device
Version: 4
# Device type can be ISO14443-3A, ISO14443-3B, ISO14443-4A, NTAG/Ultralight, Mifare Classic, Mifare DESFire
Device type: NTAG/Ultralight
# UID is common for all formats
UID: 04 85 90 54 12 98 23
# ISO14443-3A specific data
ATQA: 00 44
SAK: 00
# NTAG/Ultralight specific data
Data format version: 2
NTAG/Ultralight type: NTAG216
Signature: 1B 84 EB 70 BD 4C BD 1B 1D E4 98 0B 18 58 BD 7C 72 85 B4 E4 7B 38 8E 96 CF 88 6B EE A3 43 AD 90
Mifare version: 00 04 04 02 01 00 13 03
Counter 0: 0
Tearing 0: 00
Counter 1: 0
Tearing 1: 00
Counter 2: 0
Tearing 2: 00
Pages total: 231
Pages read: 231
Page 0: 04 85 92 9B
Page 1: 8A A0 61 81
Page 2: CA 48 0F 00
...
Page 224: 00 00 00 00
Page 225: 00 00 00 00
Page 226: 00 00 7F BD
Page 227: 04 00 00 E2
Page 228: 00 05 00 00
Page 229: 00 00 00 00
Page 230: 00 00 00 00
Failed authentication attempts: 0

Description

This file format is used to store the UID, SAK and ATQA of a Mifare Ultralight/NTAG device. It also stores the internal data of the card, the signature, the version, and the counters. The data is stored in pages, just like on the card itself.

The "NTAG/Ultralight type" field contains the concrete device type. It must be one of: Mifare Ultralight, Mifare Ultralight 11, Mifare Ultralight 21, NTAG203, NTAG213, NTAG215, NTAG216, NTAG I2C 1K, NTAG I2C 2K, NTAG I2C Plus 1K, NTAG I2C Plus 2K.

The "Signature" field contains the reply of the tag to the READ_SIG command. More on that can be found here: https://www.nxp.com/docs/en/data-sheet/MF0ULX1.pdf (page 31)

The "Mifare version" field is not related to the file format version but to the Mifare Ultralight version. It contains the response of the tag to the GET_VERSION command. More on that can be found here: https://www.nxp.com/docs/en/data-sheet/MF0ULX1.pdf (page 21)

Other fields are the direct representation of the card's internal state. Learn more about them in the same datasheet.

Version differences:

  1. Mifare Ultralight type is stored directly in Device type field
  2. Current version, Mifare Ultralight type is stored in the same-named field

Mifare Classic

Example

Filetype: Flipper NFC device
Version: 4
# Device type can be ISO14443-3A, ISO14443-3B, ISO14443-4A, NTAG/Ultralight, Mifare Classic, Mifare DESFire
Device type: Mifare Classic
# UID is common for all formats
UID: BA E2 7C 9D
# ISO14443-3A specific data
ATQA: 00 02
SAK: 18
# Mifare Classic specific data
Mifare Classic type: 4K
Data format version: 2
# Mifare Classic blocks, '??' means unknown data
Block 0: BA E2 7C 9D B9 18 02 00 46 44 53 37 30 56 30 31
Block 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 3: FF FF FF FF FF FF FF 07 80 69 FF FF FF FF FF FF
Block 4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 5: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 7: FF FF FF FF FF FF FF 07 80 69 FF FF FF FF FF FF
...
Block 238: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 239: FF FF FF FF FF FF FF 07 80 69 FF FF FF FF FF FF
Block 240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 241: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 242: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 243: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 244: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 245: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 246: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 247: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 248: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 249: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 251: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 252: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 253: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 254: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Block 255: FF FF FF FF FF FF FF 07 80 69 FF FF FF FF FF FF

Description

This file format is used to store the NFC-A and Mifare Classic specific data of a Mifare Classic card. Aside from the NFC-A data, it stores the card type (1K/4K) and the internal data of the card. The data is stored in blocks, there is no sector grouping. If the block's data is unknown, it is represented by '??'. Otherwise, the data is represented as a hex string.

Version differences:

  1. Initial version, has Key A and Key B masks instead of marking unknown data with '??'.

Example: 

...
Data format version: 1
# Key map is the bit mask indicating valid key in each sector
Key A map: 000000000000FFFF
Key B map: 000000000000FFFF
# Mifare Classic blocks
...
  1. Current version

Mifare DESFire

Example

Filetype: Flipper NFC device
Version: 4
# Device type can be ISO14443-3A, ISO14443-3B, ISO14443-4A, NTAG/Ultralight, Mifare Classic, Mifare DESFire
Device type: Mifare DESFire
# UID is common for all formats
UID: 04 2F 19 0A CD 66 80
# ISO14443-3A specific data
ATQA: 03 44
SAK: 20
# ISO14443-4A specific data
ATS: 06 75 77 81 02 80
# Mifare DESFire specific data
PICC Version: 04 01 01 12 00 1A 05 04 01 01 02 01 1A 05 04 2F 19 0A CD 66 80 CE ED D4 51 80 31 19
PICC Free Memory: 7520
PICC Change Key ID: 00
PICC Config Changeable: true
PICC Free Create Delete: true
PICC Free Directory List: true
PICC Key Changeable: true
PICC Max Keys: 01
PICC Key 0 Version: 00
Application Count: 1
Application IDs: 56 34 12
Application 563412 Change Key ID: 00
Application 563412 Config Changeable: true
Application 563412 Free Create Delete: true
Application 563412 Free Directory List: true
Application 563412 Key Changeable: true
Application 563412 Max Keys: 0E
Application 563412 Key 0 Version: 00
Application 563412 Key 1 Version: 00
Application 563412 Key 2 Version: 00
Application 563412 Key 3 Version: 00
Application 563412 Key 4 Version: 00
Application 563412 Key 5 Version: 00
Application 563412 Key 6 Version: 00
Application 563412 Key 7 Version: 00
Application 563412 Key 8 Version: 00
Application 563412 Key 9 Version: 00
Application 563412 Key 10 Version: 00
Application 563412 Key 11 Version: 00
Application 563412 Key 12 Version: 00
Application 563412 Key 13 Version: 00
Application 563412 File IDs: 01
Application 563412 File 1 Type: 00
Application 563412 File 1 Communication Settings: 00
Application 563412 File 1 Access Rights: EE EE
Application 563412 File 1 Size: 256
Application 563412 File 1: 13 37 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Description

This file format is used to store the NFC-A and Mifare DESFire specific data of a Mifare DESFire card. Aside from the NFC-A data, it stores the card type (DESFire) and the internal data of the card. The data is stored per-application, and per-file. Here, the card was written using those pm3 commands: 

hf mfdes createapp --aid 123456 --fid 2345 --dfname astra
hf mfdes createfile --aid 123456 --fid 01 --isofid 0001 --size 000100
hf mfdes write --aid 123456 --fid 01 -d 1337

Version differences: None, there are no versions yet.

Mifare Classic Dictionary

Example

# Key dictionary from https://github.com/ikarus23/MifareClassicTool.git

# More well known keys!
# Standard keys
FFFFFFFFFFFF
A0A1A2A3A4A5
D3F7D3F7D3F7
000000000000

# Keys from mfoc
B0B1B2B3B4B5
4D3A99C351DD
1A982C7E459A
AABBCCDDEEFF
714C5C886E97
587EE5F9350F
A0478CC39091
533CB6C723F6
8FD0A4F256E9
...

Description

This file contains a list of Mifare Classic keys. Each key is represented as a hex string. Lines starting with '#' are ignored as comments. Blank lines are ignored as well.

EMV resources

Example

Filetype: Flipper EMV resources
Version: 1
# EMV currency code: currency name
0997: USN
0994: XSU
0990: CLF
0986: BRL
0985: PLN
0984: BOV
...

Description

This file stores a list of EMV currency codes, country codes, or AIDs and their names. Each line contains a hex value and a name separated by a colon and a space.

Version differences:

  1. Initial version